18禁止观看强奷视频

  • <bdo id="uewog"></bdo>
  • <noscript id="uewog"></noscript>
  • Fly ash brick autoclave curing

    Fly ash brick, lime-sand brick goes on high temperature and pressure curing in autoclave.High temperature and steam curing process is the most important step during lime-sand brick and fly ash brick production,the curing environmental condition and curing time have a great influence on brick quality.

    The curing principle as follow:
    Lime-sand (fly ash) brick  is mainly rely on quick lime the effective CaO and sand of SiO2  0.8 Mpa above pressure with steam (174.5 ℃ above), under the condition to go on the thermal synthetic reaction. To create all kinds of silicate gel material, for the most part for hydrated calcium silicate and a small amount of magnesium silicate etc, with aggregate sand firmly cement together, forming a certain structure strength. In the above process after equipment pressure molding for high strength lime-sand (fly ash) brick.
    The reaction process:
     CaO + H2O - Ca (OH) 2 + 15.5 kilocalorie 
     Ca (OH) 2 + SiO2 + (n-1) H2O 174.5 ℃ saturated steam
     CaO * SiO2 * nH2O (calcium silicate) 

    Autoclaved Fly ash(lime-sand) brick advantages:
    Compared with common cement brick manufacturing process, lime-sand brick and fly ash brick making process is more complex, but it is save material and environmental friendly, can add max ratio fly ash, lime-sand, tail slag etc raw material, to up to low energy consumption, waste re-clcyle, high quality of end bricks, tyde shape, high strength; due to lime-sand (fly ash) brick high volume, the sound insulation performance is special superior. In addition lime-sand (fly ash) brick belongs to no combustible building material. Lime-sand (fly ash) brick can’t bear heat above 200 degree, and quick heat quench and acid or hard building parts for a long time. It is suitable for bearing wall of multilayer composite structure building.

    Previous:
    Next:
    Email to this supplier
         
    * Email: Please Enter email
    * Content:
     
    Please enter raw material type,brick size,production capacity and process requirement etc details...
    Products Name: Please Enter Products Name
    Your Name: Please Enter Your Name
    Tel/Fax.: Please Enter Tel or Fax
    Msn/Skype: Please Enter Msn or Skype
     

     

     
    Mob: 0086 15290435828 E-mail:sales@www.ovoptique.com Skype: temin_sales MSN:temin.sales@hotmail.com     sitemap
    Copyright ? 2012 Wenxian Temin Industrial Co., Ltd  All Rights Reserved.  Website:http://www.www.ovoptique.com   豫ICP備13004163號-14
    18禁止观看强奷视频
  • <bdo id="uewog"></bdo>
  • <noscript id="uewog"></noscript>